For grinding equipment, daily maintenance and maintenance are very necessary. If you want to process 80-600 mesh powder, you can choose Raymond mill to process high-quality powder. In order to improve production efficiency, the new Raymond mill developed by CLIRIK's research and development team has greater production capacity and lower energy consumption, and is suitable for non-metallic ore powder processing. This article mainly introduces the usual maintenance and repair work of Raymond Mill, and hopes to help customers.
The structural characteristics of Raymond mill
Raymond mill is widely used in the field of non-metallic ore. It has stable performance, high efficiency, stable operation, low noise, energy saving and consumption reduction. It is a suitable mill choice for non-metallic ore powder customers. Compared with the R-type mill with the same power, the production capacity of this mill can be increased by more than 40%, and the unit power consumption cost can be saved by more than 30%, which is an advantageous choice to promote the processing efficiency of stone powder. The pulverizer is mainly composed of a host, a feeder, a classifier, a blower, a pipe device, a storage hopper, an electronic control system, a collection system, etc., which can effectively increase the production capacity of unit equipment and reduce unit energy consumption, and is loved by the industry.
Learn more about the maintenance rules of Raymond Mill
How to maintain Raymond Mill in the normal operation process? As a high-tech enterprise based on the field of powder equipment R&D and manufacturing, after continuous summarization, the CLIRIK R&D team has compiled the maintenance rules in the following aspects, hoping to help customers.
1. There should be dedicated care
The equipment needs to be operated and maintained correctly. In the process of use, each production line needs a dedicated person to be responsible for the care and management. The on-post personnel need to have relevant qualifications and operating skills. Before operation, the enterprise should conduct pre-job training for the operator , Strengthen the relevant skills to improve management, let the operator fully understand the basic information of the principle, performance, maintenance, operating procedures of the mill.
2. Develop a more detailed management system
In order to help the operator to better manage the mill, in normal work, relevant regulations such as the "equipment maintenance safety operation system" should be formulated, and the main inspection tools and grease corresponding accessories are usually checked in order to allow the equipment to operate and operate normally.
3. Regular maintenance of equipment
After being used for a period of time, the equipment will have a certain degree of wear and damage, which requires our operators to carry out detailed maintenance at ordinary times, and strengthen the maintenance management of grinding rollers, grinding rings, blades and other accessories.
4. The roller device should be replaced regularly
After using for a period of time (more than 500 hours), the grinding roller device needs to be replaced again. At the same time, the operator must clean the rolling bearings and replace the damaged parts.
Only when the relevant repair and maintenance work of the Raymond mill is done normally can the service life of the equipment be extended and greater production benefits can be obtained. For processing non-metallic ore powder, Raymond Mill is essential. Operators need to keep the above maintenance rules in mind and do regular maintenance work to promote the normal operation of the mill and produce greater benefits.