40 Years history production base and exporter
24 hours online
Free technical support and solutions
Factory visit anytime, free pick up
Commit to delivery fast
Provide On-site installation service
Free training of product operation
365 days after-sales online
Solve customer feedback problems timely.
Help customers optimize and upgrade equipment
Contact Us ( sales@clirik.com )
Introduction of Zeolite powder grinding equipment:
——Five models: HGM80, HGM90, HGM100, HGM100A, and HGM125
——Finished production fineness: 325meshes~2500meshes, 5-47micron
——The capacity (ton/hour) ranges from 0.5T/H to 10T/H
Application of Zeolite powder grinding equipment:
Zeolite powder grinding equipment is mainly applied to grind non-inflammable, non-explosive and brittle materials with Mohs’ hardness under six. Such as calcite, chalk, limestone, dolomite, kaolin, gypsum, and talc etc, totally more than 100 kinds of materials.
Features of Zeolite grinding machine:
1.High Efficiency
Under the same finished final size and the same motor power, the capacity of the machine is twice as much as jet mill, mixing grinder and ball mill, and energy consumption decreased 30%.
2.Long lifecycle of spare parts
The ring and roller are forged by special material with high utilization,the lifetime can reach 2-5 years for grinding calcite carbonate.
3.High safety and reliability
As no rolling bearings or screws in grinding cavity, there are no problems caused by bolts shedding or rapid wear of bearings and seal components.
4.High fineness, flexible adjustment
The final fineness of the grinding materials can be adjusted between 325 meshes and 2500 mesh (47-5 micron), and the product fineness can reach D97≤5μm.
5.Environment-friendly
Main specification of Zeolite grinding machine:
Model
|
HGM80
|
HGM90
|
HGM100
|
HGM100A
|
HGM125
|
Ring Diameter(mm)
|
800
|
900
|
1000
|
1000
|
1250
|
Ring Number/pcs
|
3
|
3-4
|
3-4
|
4
|
4
|
Roller Number/pcs
|
21
|
24-32
|
27-36
|
27-36
|
40-44
|
Main Shaft Speed/r. p. min
|
230-240
|
200-220
|
180-200
|
180-200
|
135-155
|
Input Size/mm
|
≤15
|
||||
Finished Size/um
|
5-47(325-3000)
|
||||
Capacity t/h
|
0.4-4.5
|
0.4-5.5
|
0.4-6.5
|
0.4-7.5
|
0.7-10
|
Outlet Size L*W*H/m
|
13.9*4*6.2
|
14.7*4.8*7.2
|
18*4.6*8.6
|
18*4.6*8.6
|
14*9*10
|
Through long-term arduous technology research and international communication, our product quality has been in line with international level, winning a world-wide acclaim and honor, and our products are exported to ninety countries and regions like Tanzania, Nigeria, South Africa, Kenya, Turkey, Saudi Arabia, Philippines, Indonesia, Malaysia, Vietnam, Mexico, Brazil, Russia, Uzbekistan, Australia, etc.
Please feel free to write down your requirement in the form below.
We will reply you within 24 hours.
Copyright: Shanghai CLirik Machinery Co., Ltd.All rights reserved