The reason for the change in the speed of the Stone grinding equipment
2018-05-17 07:09:50
In the production process of
Stone grinding equipment, the speed of the abrasive will change. What are the specific reasons for this?
The general reasons for this are the following:
1.The feed is not uniform, the air volume is not appropriate, the power of the configured motor is not consistent
2.Blocking of the hopper mouth and the dust collector
3.The gap between the grinding roller and the grinding ring is too large and the material to be ground is too fine
All of these will have a certain influence on the grinding speed of the Stone Grinding Mill.If the grinding speed is not balanced for a long time. It will also have a negative impact on the
Stone grinding equipment, and it may cause equipment failure. If the above problem occurs with the Stone grinding equipment, we must solve it promptly.
One of the easiest problems is uneven feed and air flow.Clirik Machinery reminds everyone that professional
Stone grinding equipment manufacturers will have their own installation and technical personnel.Even if the Stone grinding equipment has a corresponding problem, it can give a corresponding plan. The Stone grinding equipment will also be adjusted accordingly without affecting production efficiency.
If you have a corresponding problem, you can consult us online, our technicians are happy to answer for you