The European version of the hammer crusher is also called the European version of the hammer mill. Since the advent of the world, it has had a significant impact on the processing of coarse and fine powder. The European version of the hammer mill is quietly changing the crusher for coarse powder processing. The field, the equipment can meet the processing needs of most materials, is a multi-faceted machine that is uncompromising.

The European version of the hammer crusher has the characteristics of large crushing ratio and is suitable for crushing brittle materials. The European version of the hammer crusher is suitable for crushing medium-hard materials such as limestone, slag, coke, coal and other materials in the cement, chemical, electric power, metallurgical and other industrial sectors. It can also be widely used in fine grinding medium hardness materials in industrial departments such as concentrating plants, refractory plants, cement plants and glass factories. The Euro version of the hammer mill is used to crush a variety of medium hard and abrasive materials. The compressive strength of the material does not exceed 100 MPa, and the water content is less than 15%. The crushed materials are coal, salt, chalk, gypsum, brick, limestone and the like. It is also used to crush waste wood, paper and crushed asbestos cement with strong fiber structure, elasticity and toughness to recover asbestos fiber, etc. It can also be used as stone crushing, stone crushing, mine crushing, plastic crushing, garbage crushing and other materials. Used for crushing equipment. In addition, the European version of the hammer crusher can be used not only for the crushing production line, sand production line, but also for the cone crusher in the beneficiation production line.

Performance characteristics of the European version of the hammer crusher

1. Working hammer, cast by new technology, with wear resistance and impact resistance.

2, according to customer requirements, adjust the required granularity.

3, structural sealing, to solve the dust pollution of the crushing workshop and the problem of body leakage.

4. The overall design is beautiful and compact.

5, the advantages of less wearing parts, easy maintenance, etc., is an upgraded product

6. Multi-port combined dust collector

7. Adding pressure device to the grinding part

The European version of the hammer crusher mainly relies on the impact to break the material. The crushing process is roughly the same. The material enters the crusher and is broken by the impact of the high-speed rotary hammer. The broken material obtains kinetic energy from the hammer head, and rushes from the high-speed to the baffle and the sieve bar in the frame. The materials collide with each other and are crushed several times. The material smaller than the gap between the screen bars is discharged from the gap. The larger material is crushed by the impact of the hammer on the sieve bar, grinding, crushing and crushing. The material is hammered. The head is extruded from the gap to obtain a product of the desired particle size.

The European version of the hammer mill can be said to have ingenious technicality in terms of product development and market positioning. In the non-burning brick field, he fills the blank of mixed coarse crushing, and in the cement industry, it makes full use of the enterprise to save cost. The advantage of equipment scale of efficiency, so the quiet success of the coarse powder mill is the result of long-term attention of the R&D enterprise to the industrial mill market, which reflects the flexibility of the company's technology research and development and the practicality of the equipment. Sex, such a company is a company with more full development potential, and it is more worthy of users' trust.

The European version of the hammer mill has been a coarse powder processing equipment since the beginning of the crusher, and its product has achieved a high level of leap. The future will play a huge role in the cement, slag, construction and other industries.