How to use stone grinding equipment – start it

2021-07-01 08:59:56

For a new stone grinding equipment, I think that the issues that people most concern is how to properly use, the following SHANGHAI CLIRIK tell you the use of stone grinding equipment.

First of all, before starting stone grinding equipment, you should check the machine if there is iron and other debris, check whether the bolt and nut loose, especially bolts and nuts inside the host should be strictly checked, check all the access door is closed are tight, adjust fan and host of the steering, exhaust valve in the fully open position.

Boot sequence of stone grinding equipment is to start the analysis machine before starting the fan, and then starts the host immediately after feeding starter host (plus a small pellet should plus normal Granularity material) and then to open the large air volume valves to ensure the feed inlet should be the premise of the outer dusting off the small exhaust valve. Then adjust the fineness of finished product. Compliance with feed grain size should be checked with a broken jaw and hoist series before starting crusher jaw gap, adjust the the analysis machine speed should be up to the approximate size requirements. Last boot following order: 1. Starting bucket elevator; 2. Starting jaw crusher; 3. Pending silo start analysis machine, there are material; 4 to start the blower (air load start to be normal operation and then load); 5 start host, start the host starts electromagnetic vibrating feeder. The milling work is the beginning. A simple sequence of operations expressed as follows: "start" hoist - crusher - analysis machine - fans - the host - feeder.

Get Price And Support

Please feel free to write down your requirement in the form below.

We will reply you within 24 hours.

Email: sales@clirik.com

24 hours online

Chat Online